Area is the amount of flat space inside a shape, measured in square units. A rectangle's area is length × width, a triangle's is half of base × height, and a circle's is π × radius squared.
Formula table
| Shape | Formula | What the letters mean |
|---|---|---|
| Rectangle | A = l × w | l = length, w = width |
| Square | A = s² | s = side length |
| Triangle | A = ½ × b × h | b = base, h = perpendicular height |
| Parallelogram | A = b × h | b = base, h = perpendicular height |
| Trapezoid | A = ½ × (a + b) × h | a and b = the two parallel sides, h = distance between them |
| Circle | A = π × r² | r = radius, π ≈ 3.14159 |
Rectangle and square
Multiply the two side lengths. A room 12 ft long and 8.5 ft wide has an area of 12 × 8.5 = 102 ft². The rectangle calculator also gives the perimeter and diagonal.
Triangle
A triangle is half of a parallelogram with the same base and height, which is where the ½ comes from.
Example. A triangle with a base of 10 cm and a height of 6 cm has an area of ½ × 10 × 6 = 30 cm².
The height must be perpendicular to the base. It is not the length of a slanted side, unless the triangle is a right triangle and you are using its two legs.
If you know all three sides but not the height, use Heron's formula. First find the semi-perimeter s = (a + b + c) ÷ 2, then:
For sides 5, 6 and 7: s = 9, so A = √(9 × 4 × 3 × 2) = √216 ≈ 14.70. The triangle area calculator accepts either set of inputs.
Parallelogram
Cut the slanted end off a parallelogram and move it to the other side, and you get a rectangle with the same base and height. So the area is base × height.
Example. A parallelogram has a base of 9 in, a slanted side of 5 in and a perpendicular height of 4 in. The area is 9 × 4 = 36 in². The slanted side of 5 is not used.
Trapezoid
A trapezoid has one pair of parallel sides. Average those two sides, then multiply by the distance between them.
Example. The parallel sides are 8 m and 14 m, and they are 5 m apart.
- Add the parallel sides: 8 + 14 = 22.
- Halve the sum: 11.
- Multiply by the height: 11 × 5 = 55 m².
You can confirm results like this with the trapezoid calculator.
Circle
Square the radius, then multiply by π.
Example 1. Radius 5 cm: A = π × 5² = 25π ≈ 78.54 cm².
Example 2. A round table is 12 ft across. The 12 ft is the diameter, so the radius is 6 ft and A = π × 6² = 36π ≈ 113.10 ft².
If you are given the diameter d, you can also use A = π × d² ÷ 4. For circumference and sector calculations, see the circle calculator.
Composite shapes
Most real floor plans and plots are not single shapes. Split them into pieces you have formulas for, find each area, and add. For holes or cut-outs, subtract.
Example: an L-shaped room. Split it into a 5 m × 4 m rectangle and a 3 m × 2 m rectangle. The areas are 20 m² and 6 m², for a total of 26 m².
Units
Area is always in square units, and converting between them uses the square of the linear conversion factor.
- 1 ft = 12 in, so 1 ft² = 144 in².
- 1 yd = 3 ft, so 1 yd² = 9 ft².
- 1 m² ≈ 10.764 ft².
The 102 ft² room above is 102 ÷ 9 ≈ 11.33 yd², which matters when buying carpet priced by the square yard.
Common mistakes
- Using a slanted side as the height. For triangles, parallelograms and trapezoids, the height is measured at a right angle to the base.
- Using the diameter as the radius. This makes a circle's area four times too large. Halve the diameter first.
- Forgetting the ½. It appears in both the triangle and the trapezoid formulas.
- Mixing units. A 10 ft by 30 in rectangle is not 300 of anything. Convert to 10 ft × 2.5 ft = 25 ft² first.
- Converting area with the linear factor. 2 yd² is 18 ft², not 6 ft².
Run the numbers yourself
Common questions
What is the formula for the area of a triangle?
Area = ½ × base × height, where the height is measured at a right angle to the base. If you only know the three sides, use Heron’s formula.
How do I find the area of a circle from its diameter?
Halve the diameter to get the radius, then calculate π × r². A circle 12 ft across has radius 6 ft and an area of about 113.1 square feet.
How do I find the area of an irregular shape?
Split it into rectangles, triangles and other simple shapes, calculate each area, and add them together. Subtract any cut-out sections.