Ultimate Calculator
Everyday guide

How to calculate GPA on a 4.0 scale

Calculate your GPA step by step: convert letter grades to points on the 4.0 scale, weight by credit hours, and work out a cumulative GPA.

To calculate GPA, convert each letter grade to grade points, multiply by the course's credit hours, add the results, and divide by the total credit hours. GPA is a credit-weighted average, so a 4-credit course counts twice as much as a 2-credit course.

The 4.0 scale

Most colleges and high schools in the United States use a version of this table. Percentage ranges are typical but vary between institutions.

Letter gradeGrade pointsTypical percentage
A4.093 to 100
A−3.790 to 92
B+3.387 to 89
B3.083 to 86
B−2.780 to 82
C+2.377 to 79
C2.073 to 76
C−1.770 to 72
D+1.367 to 69
D1.060 to 66
F0.0Below 60

Some schools award 4.3 for an A+, some do not use plus and minus grades at all, and some use 3.67 and 3.33 instead of 3.7 and 3.3. Always check your own institution's scale.

The GPA formula

GPA = total quality points ÷ total credit hours
Quality points for a course = grade points × credit hours

Worked example 1: one semester

A student takes five courses:

CourseGradeGrade pointsCreditsQuality points
BiologyA4.0312.0
CalculusB+3.3413.2
HistoryB3.039.0
ChemistryC+2.336.9
Writing seminarA−3.727.4
Total1548.5
  1. Total quality points: 12.0 + 13.2 + 9.0 + 6.9 + 7.4 = 48.5
  2. Total credits: 3 + 4 + 3 + 3 + 2 = 15
  3. GPA = 48.5 ÷ 15 ≈ 3.23

If you ignored credits and simply averaged the five grade point values, you would get (4.0 + 3.3 + 3.0 + 2.3 + 3.7) ÷ 5 = 3.26. That is wrong, because it gives the 2-credit seminar the same weight as the 4-credit calculus course. The GPA calculator does the weighting for you.

Cumulative GPA

Cumulative GPA covers every graded course you have taken. To update it, combine quality points and credits across terms. Do not average the term GPAs unless every term had the same number of credits.

Cumulative GPA = (old quality points + new quality points) ÷ (old credits + new credits)

If you only know your previous GPA, recover the quality points by multiplying: quality points = GPA × credits.

Worked example 2: adding a new semester

Before the semester above, the student had a 3.20 GPA over 45 credits.

  1. Old quality points: 3.20 × 45 = 144
  2. New quality points: 48.5 over 15 credits
  3. Combined: 144 + 48.5 = 192.5 quality points over 45 + 15 = 60 credits
  4. Cumulative GPA = 192.5 ÷ 60 ≈ 3.21

A 3.23 semester moved the cumulative figure by only 0.01, because 45 earlier credits outweigh 15 new ones. The more credits you have, the harder your cumulative GPA is to shift in either direction.

Worked example 3: what do I need to reach a target?

A student with a 3.20 GPA over 45 credits wants a 3.50 cumulative GPA after 30 more credits.

  1. Quality points needed in total: 3.50 × 75 = 262.5
  2. Quality points already earned: 3.20 × 45 = 144
  3. Still needed: 262.5 − 144 = 118.5
  4. Required GPA over the next 30 credits: 118.5 ÷ 30 = 3.95

That is nearly straight A grades. If the answer comes out above 4.0, the target cannot be reached in that number of credits. For a single course, the final grade calculator shows what you need on the last exam to earn a particular grade.

Weighted and unweighted GPA

Many high schools report two figures. Unweighted GPA uses the standard 4.0 scale for every class. Weighted GPA adds extra points for harder classes, commonly +0.5 for honors and +1.0 for AP or IB, so an A in an AP class counts as 5.0. Weighted GPAs can therefore exceed 4.0. The calculation method is the same. Only the grade point values change.

What usually does not count

  • Pass/fail or credit/no-credit courses
  • Withdrawals (W) and incompletes (I)
  • Transfer credits, at many institutions
  • Audited courses

Policies on repeated courses differ. Some schools replace the old grade and some average both attempts.

Common mistakes

  • Averaging grades without weighting by credits.
  • Averaging semester GPAs when the semesters had different credit loads.
  • Including pass/fail credits in the divisor. Leave them out of both totals.
  • Using the wrong scale. Check whether your school uses plus and minus grades and how it values them.
  • Rounding too early. Keep full precision in the totals and round the final GPA to two decimal places.

Common questions

How is GPA calculated?

Multiply each course's grade points by its credit hours to get quality points, add them up, and divide by the total credit hours. For example, 48.5 quality points over 15 credits is a 3.23 GPA.

How do I calculate cumulative GPA?

Add the quality points from all terms and divide by the total credits from all terms. Do not average term GPAs unless each term had the same number of credits.

Can a GPA be higher than 4.0?

Yes, on a weighted scale. Schools that add extra points for honors, AP or IB classes can report weighted GPAs above 4.0, while the unweighted scale tops out at 4.0.