Scientific notation writes a number as a coefficient between 1 and 10 multiplied by a power of ten, such as 4.5 × 10⁶ for 4,500,000. It keeps very large and very small numbers short and makes their size easy to compare.
Converting to scientific notation
- Move the decimal point until exactly one nonzero digit is to its left.
- Count how many places you moved it. That count is the exponent.
- If you moved the point left (a large number), the exponent is positive. If you moved it right (a number smaller than 1), the exponent is negative.
Example 1. 4,500,000: move the point 6 places left to get 4.5. Result: 4.5 × 10⁶.
Example 2. 0.00032: move the point 4 places right to get 3.2. Result: 3.2 × 10⁻⁴.
Converting back to ordinary form
Move the decimal point the number of places shown by the exponent: right for a positive exponent, left for a negative one. Fill gaps with zeros.
- 6.02 × 10³ = 6,020
- 7.1 × 10⁻³ = 0.0071
The scientific notation calculator converts in both directions and shows the steps.
Multiplying
Multiply the coefficients and add the exponents. Then adjust if the coefficient is no longer between 1 and 10.
Example 3. (3 × 10⁴) × (2.5 × 10³) = 7.5 × 10⁷.
Example 4. (6 × 10⁵) × (4 × 10³) = 24 × 10⁸. The coefficient 24 is too big, so move the point one place left and raise the exponent by one: 2.4 × 10⁹.
Dividing
Divide the coefficients and subtract the exponents.
Example 5. (8.4 × 10⁷) ÷ (2 × 10³) = 4.2 × 10⁴.
Example 6. (3 × 10⁴) ÷ (6 × 10⁻²) = 0.5 × 10⁶, since 4 − (−2) = 6. The coefficient is too small, so move the point one place right and lower the exponent by one: 5 × 10⁵.
A real case. Light travels about 3 × 10⁸ metres per second, and the Sun is about 1.5 × 10¹¹ metres away. The travel time is (1.5 × 10¹¹) ÷ (3 × 10⁸) = 0.5 × 10³ = 500 seconds, a little over 8 minutes.
Adding and subtracting
The exponents must match before you can add or subtract the coefficients. Rewrite one number so both have the same power of ten.
Example 7. (4.2 × 10⁵) + (3 × 10⁴). Rewrite 3 × 10⁴ as 0.3 × 10⁵. Then 4.2 + 0.3 = 4.5, so the sum is 4.5 × 10⁵. In ordinary numbers that is 420,000 + 30,000 = 450,000.
Engineering notation
Engineering notation is a variant in which the exponent is always a multiple of 3 and the coefficient is between 1 and 1,000. The advantage is that each power lines up with a metric prefix.
| Power | Prefix | Symbol |
|---|---|---|
| 10⁹ | giga | G |
| 10⁶ | mega | M |
| 10³ | kilo | k |
| 10⁻³ | milli | m |
| 10⁻⁶ | micro | µ |
| 10⁻⁹ | nano | n |
- 4.7 × 10⁴ ohms in engineering notation is 47 × 10³ ohms, read directly as 47 kilohms.
- 2.2 × 10⁻⁵ farads becomes 22 × 10⁻⁶ farads, or 22 microfarads.
To convert, shift the decimal point right by one or two places and lower the exponent by the same amount until it is a multiple of 3. For changing between prefixed units, the unit converter does the shifting for you.
E notation
Calculators, spreadsheets and programming languages usually show scientific notation with the letter E in place of "× 10 to the power". So 4.5E6 means 4.5 × 10⁶ and 3.2E-4 means 3.2 × 10⁻⁴. The E here has nothing to do with the number e ≈ 2.718.
Significant figures
Scientific notation shows precision clearly. Written as 4,500,000, it is unclear whether the zeros were measured or are just placeholders. 4.5 × 10⁶ has two significant figures, while 4.500 × 10⁶ has four.
Common mistakes
- Wrong sign on the exponent. Numbers smaller than 1 have negative exponents. A negative exponent does not make the number negative: 3.2 × 10⁻⁴ is a small positive number.
- Leaving the coefficient out of range. 24 × 10⁸ and 0.5 × 10⁶ are correct values but not proper scientific notation.
- Adjusting the exponent the wrong way. If the coefficient gets smaller, the exponent must get bigger, and the reverse.
- Adding exponents when adding numbers. Exponents are added only for multiplication. For addition, match the exponents and add the coefficients.
- Miscounting zeros. Count the places the decimal point moves, not the zeros. 4,500,000 has five zeros but the exponent is 6.
- Typing × 10 as well as E. Entering 4.5 × 10 E 6 on a calculator gives a result ten times too large. Type 4.5 E 6.
Run the numbers yourself
Common questions
How do I write a number in scientific notation?
Move the decimal point until one nonzero digit is left of it, then multiply by 10 raised to the number of places moved. The exponent is positive for large numbers and negative for numbers below 1.
How do you multiply numbers in scientific notation?
Multiply the coefficients and add the exponents. If the new coefficient is 10 or more, shift the decimal point left and add 1 to the exponent.
What is the difference between scientific and engineering notation?
Scientific notation keeps the coefficient between 1 and 10. Engineering notation uses only exponents that are multiples of 3, so the coefficient ranges from 1 up to 1,000 and matches metric prefixes.