pH is the negative base-10 logarithm of the hydrogen ion concentration in moles per litre: pH = −log[H⁺]. A solution with [H⁺] = 0.001 mol/L has a pH of 3.
The key formulas
pOH = −log[OH⁻]
pH + pOH = 14 (at 25 °C)
Square brackets mean concentration in mol/L (also written M). To go the other way, from pH back to concentration:
[OH⁻] = 10^(−pOH)
The relationship pH + pOH = 14 comes from the self-ionization of water. In any water-based solution at 25 °C, [H⁺] × [OH⁻] = 1.0 × 10⁻¹⁴. Taking the negative log of both sides gives the sum of 14.
The pH scale
| pH | [H⁺] in mol/L | Type | Typical example |
|---|---|---|---|
| 1 | 1 × 10⁻¹ | Strongly acidic | Stomach acid |
| 3 | 1 × 10⁻³ | Acidic | Vinegar |
| 5 | 1 × 10⁻⁵ | Weakly acidic | Black coffee |
| 7 | 1 × 10⁻⁷ | Neutral | Pure water |
| 9 | 1 × 10⁻⁹ | Weakly basic | Baking soda solution |
| 11 | 1 × 10⁻¹¹ | Basic | Household ammonia |
| 13 | 1 × 10⁻¹³ | Strongly basic | Drain cleaner |
Example values are approximate. Below 7 is acidic, 7 is neutral, and above 7 is basic (alkaline).
Why the scale is logarithmic
Hydrogen ion concentrations in everyday solutions range over more than fourteen powers of ten. A log scale compresses that into manageable numbers. The consequence is that each step of 1 on the pH scale is a factor of 10 in concentration:
- pH 3 is 10 times more acidic than pH 4.
- pH 3 is 100 times more acidic than pH 5.
- pH 3 is 1,000 times more acidic than pH 6.
Because of the minus sign, a lower pH means a higher hydrogen ion concentration. If logarithms are unfamiliar, the logarithm calculator lets you experiment with them.
Strong acids
A strong acid dissociates completely in water. For an acid that releases one hydrogen ion per molecule, such as HCl, HNO₃ or HBr, [H⁺] equals the acid concentration.
Worked example 1: 0.0035 M HCl
- [H⁺] = 0.0035 mol/L = 3.5 × 10⁻³
- log(3.5 × 10⁻³) = log 3.5 + log 10⁻³ = 0.544 − 3 = −2.456
- pH = −(−2.456) ≈ 2.46
A quick sense check: 0.0035 lies between 0.001 (pH 3) and 0.01 (pH 2), so the answer must be between 2 and 3.
Strong bases
A strong base such as NaOH or KOH dissociates completely to give hydroxide ions. Find pOH first, then subtract from 14.
Worked example 2: 0.002 M NaOH
- [OH⁻] = 0.002 mol/L = 2 × 10⁻³
- pOH = −log(2 × 10⁻³) = −(0.301 − 3) = 2.699
- pH = 14 − 2.699 ≈ 11.30
Worked example 3: 0.005 M Ca(OH)₂
Each unit of calcium hydroxide releases two hydroxide ions.
- [OH⁻] = 2 × 0.005 = 0.010 mol/L
- pOH = −log(0.010) = 2.00
- pH = 14 − 2.00 = 12.00
From pH back to concentration
Worked example 4: a solution with pH 4.60
- [H⁺] = 10^(−4.60)
- [H⁺] ≈ 2.5 × 10⁻⁵ mol/L
- pOH = 14 − 4.60 = 9.40, so [OH⁻] = 10^(−9.40) ≈ 4.0 × 10⁻¹⁰ mol/L
The pH calculator converts between pH, pOH, [H⁺] and [OH⁻] in any direction. If you are starting from a mass of solute and a volume, find the concentration first with the molarity calculator.
A note on weak acids and bases
Weak acids such as ethanoic (acetic) acid only partly dissociate, so [H⁺] is much smaller than the acid concentration. Their pH depends on the acid dissociation constant, Ka, and needs an equilibrium calculation. For a weak acid of concentration C, a common approximation is [H⁺] ≈ √(Ka × C). Using the strong-acid method on a weak acid gives a pH that is too low.
Common mistakes
- Dropping the minus sign. log(0.001) is −3. The pH is +3.
- Using natural log. pH uses log base 10, the "log" key, not "ln".
- Stopping at pOH for a base. A base with pOH 2.7 has pH 11.3, not 2.7.
- Ignoring multiple ions. Ca(OH)₂ and Ba(OH)₂ give two OH⁻ each.
- Thinking the scale is linear. pH 2 is not twice as acidic as pH 4. It is 100 times as acidic.
- Applying the formula to extremely dilute acids. A 10⁻⁹ M HCl solution does not have pH 9. Water itself supplies 10⁻⁷ M of H⁺, so the pH stays just below 7.
Run the numbers yourself
Common questions
What is the formula for pH?
pH = −log[H⁺], where [H⁺] is the hydrogen ion concentration in moles per litre and the logarithm is base 10.
How do I find the pH of a strong base?
Calculate pOH = −log[OH⁻], then use pH = 14 − pOH at 25 °C. A 0.002 M NaOH solution has pOH 2.70 and pH 11.30.
How much more acidic is pH 3 than pH 5?
100 times. Each whole pH unit is a factor of 10 in hydrogen ion concentration, so two units is 10 × 10.