Ohm's law states that the voltage across a conductor equals the current through it multiplied by its resistance: V = I × R. If you know any two of voltage, current and resistance, you can calculate the third.
The three quantities
| Quantity | Symbol | Unit | What it describes |
|---|---|---|---|
| Voltage | V | volt (V) | The electrical "push" between two points |
| Current | I | ampere (A) | The rate at which charge flows |
| Resistance | R | ohm (Ω) | How strongly a component opposes current |
The formula in three forms
I = V ÷ R
R = V ÷ I
For a fixed resistance, current is directly proportional to voltage: double the voltage and the current doubles. For a fixed voltage, current is inversely proportional to resistance: double the resistance and the current halves. The Ohm's law calculator solves for whichever quantity is missing.
Worked example 1: finding current
A 12 V battery is connected across a 4 Ω resistor.
- I = V ÷ R = 12 ÷ 4
- I = 3 A
Electrical power
Power is the rate at which electrical energy is converted to heat, light or motion. It is measured in watts (W).
P = I² × R
P = V² ÷ R
The second and third forms come from substituting Ohm's law into the first. Use whichever matches the quantities you know.
For the circuit in example 1, P = V × I = 12 × 3 = 36 W. Checking with the other forms: I² × R = 3² × 4 = 36 W, and V² ÷ R = 144 ÷ 4 = 36 W.
Worked example 2: a kettle
A kettle is rated at 1,500 W on a 120 V supply. What current does it draw, and what is the resistance of its heating element?
- From P = V × I: I = P ÷ V = 1,500 ÷ 120 = 12.5 A
- From R = V ÷ I: R = 120 ÷ 12.5 = 9.6 Ω
- Check: V² ÷ R = 14,400 ÷ 9.6 = 1,500 W
Series and parallel resistors
Series
Resistors in series are connected end to end, so the same current passes through each one. Their resistances add:
Parallel
Resistors in parallel are connected across the same two points, so each has the same voltage across it. The current divides between them, and the reciprocals of the resistances add:
For exactly two resistors this simplifies to R total = (R1 × R2) ÷ (R1 + R2). The total in parallel is always less than the smallest individual resistor, because every extra branch gives the current another path.
Worked example 3: the same two resistors, both ways
A 100 Ω and a 220 Ω resistor are connected to a 9 V battery.
In series:
- R total = 100 + 220 = 320 Ω
- I = 9 ÷ 320 ≈ 0.0281 A = 28.1 mA
- Voltage across the 100 Ω resistor: 0.028125 × 100 ≈ 2.81 V
- Voltage across the 220 Ω resistor: 0.028125 × 220 ≈ 6.19 V
The two voltages add to 9 V, as they must. This arrangement is called a voltage divider.
In parallel:
- R total = (100 × 220) ÷ (100 + 220) = 22,000 ÷ 320 = 68.75 Ω
- Total current: I = 9 ÷ 68.75 ≈ 0.1309 A = 130.9 mA
- Current in the 100 Ω branch: 9 ÷ 100 = 90 mA
- Current in the 220 Ω branch: 9 ÷ 220 ≈ 40.9 mA
The branch currents add to 130.9 mA. The smaller resistor carries the larger share.
Where Ohm's law does not apply
Ohm's law describes "ohmic" components, whose resistance stays constant as voltage changes. Ordinary resistors and metal wires at a steady temperature behave this way. Diodes, LEDs and transistors do not: their current is not proportional to voltage. A filament lamp is also non-ohmic, because its resistance rises as it heats up.
Common mistakes
- Ignoring unit prefixes. Convert milliamps to amps (÷ 1,000) and kilohms to ohms (× 1,000) before calculating. 5 V across 2 kΩ gives 0.0025 A, not 2.5 A. The unit converter can help with prefixes.
- Adding parallel resistors directly. Add reciprocals, then take the reciprocal of the sum.
- Using the total voltage for one series component. Each resistor in series gets only its share of the voltage.
- Forgetting to square. In P = I² × R, the current is squared, so doubling the current quadruples the power.
- Mixing up voltage and current. Voltage is measured across a component. Current is measured through it.
Run the numbers yourself
Common questions
What is Ohm's law in simple terms?
Voltage equals current times resistance: V = I × R. For a fixed resistance, increasing the voltage increases the current in proportion.
How do I calculate electrical power?
Multiply voltage by current: P = V × I. You can also use P = I² × R or P = V² ÷ R, depending on which quantities you know.
Why is the total resistance lower in parallel?
Each parallel branch gives current an extra path, so more current flows for the same voltage. The combined resistance is always less than the smallest individual resistor.